Quick answer: to apply a label or vinyl sticker without bubbles, start on a clean, dry, smooth surface at room temperature, anchor one edge first, then press the label down slowly from that edge to the other with a soft squeegee or card. Small bubbles can usually be pushed out to the nearest edge. We're ACLM Custom Prints in Rio Linda, just north of Sacramento, and these are the same steps we share with the small businesses we print labels for.
Prep the surface first
Labels stick best to smooth, clean, dry surfaces such as glass jars, sealed plastic bottles, tins, coated boxes and smooth containers. Textured, dusty or very flexible surfaces are harder because the adhesive can't make full contact.
- Wipe the spot with a lint-free cloth to remove dust, fingerprints, oil and old label residue.
- Let it dry completely. A little moisture or oil is the most common cause of bubbles and lifting corners.
- Work indoors at a moderate temperature. Let jars or candles that were in a cold room or near a heater come back to room temperature first.
Tools that help
- A microfiber or lint-free cloth
- Masking tape and a ruler for straight placement
- A plastic squeegee or a firm card wrapped in a soft cloth
- A fine pin for the occasional tiny bubble
Small product labels: peel a little, anchor, press
For most jar, bottle, candle and soap labels, don't peel the whole backing off at once. Peel back a small section, line up and anchor that edge, then slowly pull the rest of the backing away while you press the label down with your card or thumb. On round jars and bottles, roll the container slowly against your hand as you go so the label wraps evenly.
If you're labeling a whole batch, mark the placement with a strip of masking tape or a simple cardboard guide so every label sits at the same height. Customers notice when a shelf of products lines up.
Larger stickers and logos: the hinge method
- Place the sticker where you want it with the backing still on.
- Run a strip of masking tape across the top edge to make a hinge.
- Lift the sticker up, peel the backing away, and lower it back down slowly.
- Press from the taped edge downward in firm, overlapping strokes, pushing air out as you go.
- If it has transfer tape, peel that back slowly at a sharp angle, almost flat against the surface.
Fixing bubbles and wrinkles
- Push small bubbles toward the nearest edge with light, steady pressure.
- If one stays, make a tiny pinhole at the edge of the bubble and press the air out.
- Catch wrinkles right away: gently lift only that section and reapply it slowly.
- Give the label a day to settle before heavy handling.
Our label and sticker vinyl is made for indoor use, which suits most packaging, jars and products kept on a shelf.
Try it before your full order
Not sure how a label will sit on your container? A sample ships out the same day you order, and the $10 sample includes shipping, so you can test it on your actual jar or box. Small orders are welcome, with no big-box minimums, and our turnaround is built to beat the big printers. Send your logo or idea and we'll help get your artwork print-ready. Order custom stickers and labels, or get a sticker sample.
Related reading:
- Custom Product Labels Sacramento: /pages/custom-labels-sacramento
- Small Batch Custom Labels in Sacramento Without Big Minimums: /blogs/blog/small-batch-custom-labels-in-sacramento-without-big-minimums
- Candle and Soap Labels for Sacramento Small Businesses: /blogs/blog/candle-and-soap-labels-for-sacramento-small-businesses
Start your labels on our contact page: /pages/contact
ACLM also offers printing services.
If you are ordering for a Sacramento-area shop, see our page for custom stickers and product labels in Sacramento. You can also order custom stickers and labels now.